It is easy to imagine the CE marking as a compulsory sticker on the finished crane. In fact, the opposite is true: the marking is the very last, externally visible element of a lengthy technical and documentation process. The CE mark indicates that the manufacturer – on its own responsibility – has certified that the equipment complies with the relevant EU requirements.
This is particularly important in the case of cranes. A bridge crane, slewing jib crane or other lifting equipment does not operate in isolation: the electrical system, control system, brakes, limit switches, load-bearing components and safety features all form a single system. Consequently, conformity assessment does not consist of a single test.
The result of a process
The process begins at the drawing board. The intended use must be defined, the hazards must be identified, the risks must be assessed, and technical solutions must then be selected that eliminate or reduce them.
Harmonised standards play an important role in this. As we mentioned in a previous article, in the world of cranes there is not just one on the standard, but rather we are talking about a system of requirements that builds upon one another.
This is followed by the conformity assessment and the technical documentation Compilation. Drawings, calculations, risk assessments, applicable standards, tests and the instructions for use together demonstrate that the machine not only operates but also meets the prescribed safety requirements.
At the end of the process, the declaration of conformity is drawn up, and only then can the CE marking be affixed. Important: the CE marking does not mean that a regulatory authority has „approved” the crane, nor is it a quality award. It is the manufacturer’s declaration that it has met the relevant requirements and can provide documentation to prove this.
Changing regulations
In 2026, the system set out in the Machinery Directive 2006/42/EC will still apply to machinery placed on the EU market. From 20 January 2027, however, the new, directly applicable (EU) Regulation (EU) 2023/1230 on machinery will take over as the main framework.
This change does not render the principles currently in place obsolete; rather, it further strengthens traceability and risk management.
And what happens if an existing crane is significantly modified? In such cases, it may no longer be sufficient to treat the work as a simple repair: the modification may also raise new compliance issues.
That is why it is important to have a clear understanding of the task at hand when selecting the right type of machine – that is what the Crane Guide – Which crane is best for what? our summary entitled .
The CE marking is therefore not the beginning of the story, but the end. True conformity is achieved through design, calculations, documentation and carefully carried out tests.