Our company is able to provide expert assistance not only during the design and installation of your crane or hoist, but also during its operation. We undertake the servicing, warranty and out-of-warranty repair of cranes, hoists and enclosed space hoists manufactured, distributed or modified by us, as well as other material handling equipment: trolleys, hand chain hoists.
Among the activities of Eco-Cranes Ltd., the most important are the cranes and all other mechanical and manual lifting equipment of our customers. Standard MSZ 9721/2-81 periodic structural, main and safety inspections, and the compilation of reports and other documentation.
Regular and thorough maintenance cranes' uptime is improved, and the risk of production loss due to failure is significantly reduced.
Order of inspections
The MSZ 9721/1:2009 establishes the order of structural, main and safety inspections as follows:
The commissioning the lifting machinery must be subjected to a structural inspection, a main inspection and a safety inspection at least every 5 years, depending on the number of groups in operation. Unless otherwise agreed, the following shall be responsible for carrying out the inspections and, in the absence of the requisite professional qualifications, for having them carried out must be provided by the owner of the lifting machinery.
The structural and main inspection shall be carried out in relation to the number of groups of lifting machinery in service. In the case of lifting machinery of special design and purpose, a more frequent test than that prescribed may be required.
The safety review shall be carried out at least every five years, irrespective of the number of operating groups, or whenever the environment of the lifting machinery changes (e.g. change of technology served).
The periodic inspection our expert staff will check that the lifting equipment can be operated properly and safely, and that it complies with the MSZ 19170 series of standards regulations.
The structural analysis the structural elements of the lifting machinery must be examined for damage, wear, permanent deformation or other abnormalities (e.g. joint loosening, cracks, fractures).
The main test In addition to the above, our service technicians will check the relationship between the lifting machine and its environment, its main technical characteristics, whether it conforms to the specifications in the machine manual and whether the lifting machine has the required safety equipment and documentation.
The security surface inspection the structural design, mechanical and electrical installations and safety equipment of the lifting machinery must be examined to check that they comply with the safety requirements in force at the time of the test, that they are in working order and that their environmental characteristics are identical to those considered at the design and manufacturing stages.
During any inspection, it is worthwhile and possible to look for opportunities to upgrade the lifting equipment. This is mainly due to the to reduce the risk of accidents The risk of accidents can be reduced by replacing bare overhead contact lines with floating cables, by installing closed gearboxes instead of open drives, and by using shunt control.
Our staff will propose improvements to our clients and, if required, will also prepare a quotation for the work to be carried out.
Documenting the inspection
The checks cover the following accompanying documentation for instruments as well.
It is necessary to check whether it exists and whether the documentation corresponds to the actual situation. All inspections must be recorded in accordance with the requirements.
The MSZ 9725 standard the performance of the tests must be documented in the documentation accompanying the lifting machinery, with reference to the identification mark of the test report, measurement logbook or other document.
Written records and documents containing the findings and results of the tests must be kept as an annex to the accompanying documentation of the lifting machinery.
Benefits of our tests
For our contracted customers they don't have to keep track of the date of the mandatory maintenance, we do it for them.
Our expert staff will automatically appear and carry out the compulsory test when it is due, at a pre-arranged time.
Our services include We also complete crane documentation, complete lifting equipment administration, commissioning and certification procedures, which relieve our partners from the bureaucratic tasks associated with the operation of lifting equipment.
All of our service technicians have undergone professional training and have well-equipped service vehicles at their disposal. The products we distribute SWF lifting machines an ever-expanding parts warehouse to ensure repairs are carried out as quickly as possible.
Regular services failures can still occur, but to mitigate the loss of production, we aim to have a minimum of within 24 hours start troubleshooting. To further alleviate the difficulties, we offer a discount on minor repairs and parts.
We are your partner not only for the installation, but also for the operation, call us with confidence!
